{"id":824,"date":"2024-04-03T12:01:41","date_gmt":"2024-04-03T12:01:41","guid":{"rendered":"https:\/\/the-regs.co.uk\/blog\/?p=824"},"modified":"2024-04-03T12:01:43","modified_gmt":"2024-04-03T12:01:43","slug":"how-to-test-radial-socket-circuits","status":"publish","type":"post","link":"https:\/\/the-regs.co.uk\/blog\/?p=824","title":{"rendered":"How to test radial socket circuits"},"content":{"rendered":"\n

In this post we are going to cover the often-misunderstood requirements for testing radial single-phase standard socket-outlet circuits here in the UK. <\/p>\n\n\n\n

\n A radial socket circuit starts at the consumer unit \/ distribution board \u2018CU\/DB\u2019 and ends at the final socket on the circuit. Unlike a ring socket circuit, the wiring does not return to the CU\/DB from this final point.\n<\/p>\n\n\n\n

Guidance on cables and accessories used on both ring and radial socket circuits can be found in the 18th<\/sup> Edition Wiring Regulations BS7671:2018+A2:2022 Appendix 15<\/strong>.<\/p>\n\n\n\n

For example<\/strong><\/p>\n\n\n\n

<\/a> Radial socket circuits wired in 2.5mm Live, 1.5mm CPC. PVC\/PVC cable should be protected by a 20A overcurrent device \u2018circuit breaker\u2019.<\/p>\n\n\n\n

Radial socket circuits wired in 4.0mm Live, 1.5mm CPC. PVC\/PVC cable should be protected by a 30A or 32A overcurrent device \u2018circuit breaker\u2019. <\/p>\n\n\n\n

Additional protection using a 30mA RCD should be used especially in domestic installations through either an RCBO or RCCB. <\/p>\n\n\n\n

Testing <\/strong><\/p>\n\n\n\n

Before you start, please ensure that all safe isolation procedures are in place<\/strong> and that you have isolated the CU\/DB. This is done by switching off and placing a lock and label on the main switch for the CU\/DB. Using an approved voltage indicator \u2018see GS38\u2019 and a proving unit, prove that your voltage testers are working correctly. Then on the load side of the main switch test between N \u2013 L, N \u2013 E and E \u2013 L, they should all show 0v. <\/p>\n\n\n\n

Continuity of Protective Conductors<\/strong><\/p>\n\n\n\n

At the CU\/DB connect the Line and the CPC of the radial circuit together. Then at each socket-outlet using a continuity tester set to ohms measure across Line (R1) and Earth (R2)<\/strong>. Ensure that you have nulled your test leads if needed and use a plug-in lead or adapter so there is no need to remove the socket-outlet fronts as you go. <\/p>\n\n\n\n

You should notice that the resistance reading increases as you work your way from the CU\/DB to the final point. Record the highest reading and this will be the R1+R2 reading for this circuit<\/strong>. This reading should be recorded as it is used on the schedule of test results on any certificates used. <\/p>\n\n\n\n

\n To confirm that your reading is accurate you can compare your resistance reading to the values given in Guidance Note 3 table B1 which shows the values of resistance per metre of each available conductor size.\n<\/p>\n\n\n\n

\n For example, a 2.5\/1.5 cable has a resistance of 19.51m<\/a>\u2126 per metre. If we know that our circuit is 9.5 metres long, we can calculate what the value should be by\u2026\n<\/p>\n\n\n\n

(19.51 x 9.5)\/1000 = 0.19 \u2126<\/strong>. You now have a benchmark to compare your measured value against and a higher reading could indicate a possible loose connection along the circuit. <\/p>\n\n\n\n

Polarity <\/strong><\/p>\n\n\n\n

This is to ensure that the Line, Neutral and CPC conductors have been connected correctly<\/strong> at the rear of each socket-outlet. Similar to the previous test but this time at the CU\/DB connect the Line and Neutral conductors together and measure across Line and Neutral at each socket-outlet. <\/p>\n\n\n\n

\n This reading again should rise as you work your way from the CU\/DB. There is no need to record this reading as we are only checking that the connections at the are the correct way round.\n<\/p>\n\n\n\n

NOTE:<\/strong> If when completing this test and the previous Line \u2013 Earth test you fail to get a reading when checking both L \u2013 E and L \u2013 N at any socket-outlet this will indicate a cross connection at the rear of the socket and should be investigated. <\/p>\n\n\n\n

Conclusion <\/strong><\/p>\n\n\n\n

\n By correctly performing both tests we have confirmed the continuity of the protective conductor and the correct polarity at each socket-outlet on the radial circuit. It\u2019s also worth noting that the R1+R2 reading forms part of the overall earth fault loop impedance value \u2018Zs\u2019 for this circuit as Zs = Ze+(R1+R2). \n<\/p>\n\n\n\n

This Zs value when measured as part of your live testing should be compared to 80% of the values given in BS7671 table 41.3<\/strong> to ensure that the overcurrent protective device will meet its maximum disconnection time under fault conditions. <\/p>\n\n\n\n

Also, if an RCD is present that should be tested as part of the live testing to ensure that it meets its maximum disconnection time of 300 milliseconds at 1 x its rating. <\/p>\n\n\n\n

\n Hope that you found this helpful for more information and online training see\u2026\n<\/p>\n\n\n\n

City & Guilds 18th<\/sup> Edition online course with at home exam\u2026<\/strong><\/p>\n\n\n\n

https:\/\/the-regs.co.uk\/18thEdition\/onlinecourse.php<\/a><\/p>\n\n\n\n

Inspection and testing City & Guilds 2391-52\u2026 <\/strong><\/p>\n\n\n\n

https:\/\/2391pass.co.uk\/inspectionandtesting\/2391course.php<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

In this post we are going to cover the often-misunderstood requirements for testing radial single-phase standard socket-outlet circuits here in the UK. A radial socket circuit starts at the consumer unit \/ distribution board \u2018CU\/DB\u2019 and ends at the final socket on the circuit. Unlike a ring socket circuit, the wiring does not return to…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[33,13,11],"tags":[66,65,63,62,64],"class_list":["post-824","post","type-post","status-publish","format-standard","hentry","category-deadtesting","category-inspection-and-testing","category-real-world-applications","tag-continuity-of-cpc","tag-polarity","tag-radial-socket-outlets","tag-radial-sockets","tag-testing","th-blog blog-single has-post-thumbnail"],"yoast_head":"\nHow to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/the-regs.co.uk\/blog\/?p=824\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training\" \/>\n<meta property=\"og:description\" content=\"In this post we are going to cover the often-misunderstood requirements for testing radial single-phase standard socket-outlet circuits here in the UK. A radial socket circuit starts at the consumer unit \/ distribution board \u2018CU\/DB\u2019 and ends at the final socket on the circuit. Unlike a ring socket circuit, the wiring does not return to...\" \/>\n<meta property=\"og:url\" content=\"https:\/\/the-regs.co.uk\/blog\/?p=824\" \/>\n<meta property=\"og:site_name\" content=\"the-Regs : BS7671 18th Edition Online Training\" \/>\n<meta property=\"article:published_time\" content=\"2024-04-03T12:01:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-04-03T12:01:43+00:00\" \/>\n<meta name=\"author\" content=\"the Regs Guy\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@theregsguy\" \/>\n<meta name=\"twitter:site\" content=\"@theregsguy\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"the Regs Guy\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824\"},\"author\":{\"name\":\"the Regs Guy\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/0d7feabc48e1ab05b0c346e599ea65cf\"},\"headline\":\"How to test radial socket circuits\",\"datePublished\":\"2024-04-03T12:01:41+00:00\",\"dateModified\":\"2024-04-03T12:01:43+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824\"},\"wordCount\":756,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#organization\"},\"keywords\":[\"Continuity of CPC\",\"Polarity\",\"Radial Socket-Outlets\",\"Radial Sockets\",\"Testing\"],\"articleSection\":[\"Electrical Testing - Dead Testing\",\"Inspection and Testing\",\"Real World Applications\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824\",\"url\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824\",\"name\":\"How to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#website\"},\"datePublished\":\"2024-04-03T12:01:41+00:00\",\"dateModified\":\"2024-04-03T12:01:43+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?p=824#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to test radial socket circuits\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/\",\"name\":\"the-Regs.co.uk 18th Edition Online Training Specialist\",\"description\":\"BS 7671: 18th Edition Wiring Regulations - Study when you want and pass your exam when you're ready...\",\"publisher\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#organization\",\"name\":\"the-Regs : BS7671 18th Edition Online Training\",\"url\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/the-regs.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/favicon-192x192-1.png?fit=192%2C192&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/the-regs.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/favicon-192x192-1.png?fit=192%2C192&ssl=1\",\"width\":192,\"height\":192,\"caption\":\"the-Regs : BS7671 18th Edition Online Training\"},\"image\":{\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/theregsguy\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/0d7feabc48e1ab05b0c346e599ea65cf\",\"name\":\"the Regs Guy\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g\",\"caption\":\"the Regs Guy\"},\"description\":\"A professional qualified electrician with nearly forty years of under paid, hard work within the electrical installation industry. I've also been a successful electrical installation tutor since 2008. Delivering both City & Guilds \\\/ EAL level 3 courses including \\\"18th Edition Wiring Regulations, Inspection & Testing (initial verification and periodic inspection, testing and reporting), Building Regulations, PAT and Part P etc.\\\" both in the private sector and local FE colleges. I've also been running my own training center since 2015. See www.waybrite.co.uk\",\"sameAs\":[\"http:\\\/\\\/www.the-regs.co.uk\"],\"url\":\"https:\\\/\\\/the-regs.co.uk\\\/blog\\\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/the-regs.co.uk\/blog\/?p=824","og_locale":"en_GB","og_type":"article","og_title":"How to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training","og_description":"In this post we are going to cover the often-misunderstood requirements for testing radial single-phase standard socket-outlet circuits here in the UK. A radial socket circuit starts at the consumer unit \/ distribution board \u2018CU\/DB\u2019 and ends at the final socket on the circuit. Unlike a ring socket circuit, the wiring does not return to...","og_url":"https:\/\/the-regs.co.uk\/blog\/?p=824","og_site_name":"the-Regs : BS7671 18th Edition Online Training","article_published_time":"2024-04-03T12:01:41+00:00","article_modified_time":"2024-04-03T12:01:43+00:00","author":"the Regs Guy","twitter_card":"summary_large_image","twitter_creator":"@theregsguy","twitter_site":"@theregsguy","twitter_misc":{"Written by":"the Regs Guy","Estimated reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/the-regs.co.uk\/blog\/?p=824#article","isPartOf":{"@id":"https:\/\/the-regs.co.uk\/blog\/?p=824"},"author":{"name":"the Regs Guy","@id":"https:\/\/the-regs.co.uk\/blog\/#\/schema\/person\/0d7feabc48e1ab05b0c346e599ea65cf"},"headline":"How to test radial socket circuits","datePublished":"2024-04-03T12:01:41+00:00","dateModified":"2024-04-03T12:01:43+00:00","mainEntityOfPage":{"@id":"https:\/\/the-regs.co.uk\/blog\/?p=824"},"wordCount":756,"commentCount":0,"publisher":{"@id":"https:\/\/the-regs.co.uk\/blog\/#organization"},"keywords":["Continuity of CPC","Polarity","Radial Socket-Outlets","Radial Sockets","Testing"],"articleSection":["Electrical Testing - Dead Testing","Inspection and Testing","Real World Applications"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/the-regs.co.uk\/blog\/?p=824#respond"]}]},{"@type":"WebPage","@id":"https:\/\/the-regs.co.uk\/blog\/?p=824","url":"https:\/\/the-regs.co.uk\/blog\/?p=824","name":"How to test radial socket circuits - the-Regs : BS7671 18th Edition Online Training","isPartOf":{"@id":"https:\/\/the-regs.co.uk\/blog\/#website"},"datePublished":"2024-04-03T12:01:41+00:00","dateModified":"2024-04-03T12:01:43+00:00","breadcrumb":{"@id":"https:\/\/the-regs.co.uk\/blog\/?p=824#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/the-regs.co.uk\/blog\/?p=824"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/the-regs.co.uk\/blog\/?p=824#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/the-regs.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"How to test radial socket circuits"}]},{"@type":"WebSite","@id":"https:\/\/the-regs.co.uk\/blog\/#website","url":"https:\/\/the-regs.co.uk\/blog\/","name":"the-Regs.co.uk 18th Edition Online Training Specialist","description":"BS 7671: 18th Edition Wiring Regulations - Study when you want and pass your exam when you're ready...","publisher":{"@id":"https:\/\/the-regs.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/the-regs.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/the-regs.co.uk\/blog\/#organization","name":"the-Regs : BS7671 18th Edition Online Training","url":"https:\/\/the-regs.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/the-regs.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/the-regs.co.uk\/blog\/wp-content\/uploads\/2025\/10\/favicon-192x192-1.png?fit=192%2C192&ssl=1","contentUrl":"https:\/\/i0.wp.com\/the-regs.co.uk\/blog\/wp-content\/uploads\/2025\/10\/favicon-192x192-1.png?fit=192%2C192&ssl=1","width":192,"height":192,"caption":"the-Regs : BS7671 18th Edition Online Training"},"image":{"@id":"https:\/\/the-regs.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/x.com\/theregsguy"]},{"@type":"Person","@id":"https:\/\/the-regs.co.uk\/blog\/#\/schema\/person\/0d7feabc48e1ab05b0c346e599ea65cf","name":"the Regs Guy","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/secure.gravatar.com\/avatar\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f10b538b4ce6fdea13c84ac1ce266ae912ec071c6775b6ce8df5fdad3ac24bb0?s=96&d=mm&r=g","caption":"the Regs Guy"},"description":"A professional qualified electrician with nearly forty years of under paid, hard work within the electrical installation industry. I've also been a successful electrical installation tutor since 2008. Delivering both City & Guilds \/ EAL level 3 courses including \"18th Edition Wiring Regulations, Inspection & Testing (initial verification and periodic inspection, testing and reporting), Building Regulations, PAT and Part P etc.\" both in the private sector and local FE colleges. I've also been running my own training center since 2015. See www.waybrite.co.uk","sameAs":["http:\/\/www.the-regs.co.uk"],"url":"https:\/\/the-regs.co.uk\/blog\/?author=1"}]}},"jetpack_featured_media_url":"","jetpack_shortlink":"https:\/\/wp.me\/p32IMi-di","jetpack_sharing_enabled":true,"jetpack-related-posts":[],"_links":{"self":[{"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/824","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=824"}],"version-history":[{"count":1,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/824\/revisions"}],"predecessor-version":[{"id":825,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/824\/revisions\/825"}],"wp:attachment":[{"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=824"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=824"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/the-regs.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=824"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}