Category: 18th Edition BS7671

  • Home
  • 18th Edition BS7671

RCD Protection in Domestic Installations

Within domestic installations there are numerous regulations within BS 7671:2018 concerning additional protection through the use of 30mA RCDs… 411.3.3: Gives us additional protection via a 30 mA RCD for ‘general’ sockets, both indoor and outdoors. 411.3.4: Again 30 mA RCD additional protection for all lighting circuits. 522.6.202:

READ MORE

SPDs Where and When?

Within the 18th Edition as far as SPDs and protection against transient overvoltages are concerned there is no need to provide protection for single dwelling units (safe to assume they mean domestic, although there is no definition for a dwelling unit within Part 2 which I think is

READ MORE

The Appendices and the 18th Edition Exam

Why you shouldn’t spend too much time on the Appendices… At the back of the 18th Edition book ‘BS7671:2018’ we have 17 appendices containing additional or supplementary information to the rules and regulations within the book. If you look though you’ll see that Appendices 11 and 12 are

READ MORE

Calculating Volt-Drop with the 18th Edition

Calculating voltage drop… You won’t find this formula anywhere in BS7671:2018 as this is another example of where G&G / EAL assume some prior electrical theory knowledge, but the formula is… Voltage Drop = (mV/A/m) x Ib x L / 1000. (mV/A/m): To find the value for (mV/A/m)

READ MORE

Finding your way around the 18th Edition BS7671

The 18th Edition exam is an assessment of your ability to use the Wiring Regulations BS7671 2018 out there in the big world. As such problems and questions may not always be worded exactly as you come across them in the book. The first step to answering a

READ MORE

A controversial change within Part 4, Chapter 41 – 18th Edition

An End to Protective Equipotential Bonding? There are some significant changes being introduced by the 18th Edition of the Wiring Regulations BS 7671:2018. Chapter 41 has arguably one of the most controversial… “Metallic pipes entering the building having an insulating section at their point of entry need not

READ MORE

About the 18th Edition BS7671

A new version of the Wiring Regulations will come into effect on the 1st January 2019… The 18th Edition of BS7671:2018 Requirements for Electrical Installations (to give it its full title) introduces some significant changes to the previous 17th Edition of BS7671. This new book if all goes

READ MORE